Textile Coatings - DM677

dm685 image2
dm685 image3

Download

Click to download a file.

Further downloads can be found on our downloads page.  Videos can be found on our videos page.

DM677

Dupre Minerals’ MicaShield is a stable, water based, dispersion of high aspect ratio platelets produced by the controlled exfoliation of specially selected vermiculite ores; vermiculite is the name given to a group of hydrated laminar aluminium-iron-magnesium silicate minerals. The MicaShield product range offers temperature resistant coatings up to 1100 °C that are non-flammable (unformulated) or, for formulated products incorporating organic additives, of limited flammibilty. MicaShield products are safe and easy to use, non-toxic and enviromentally-friendly.

As it is a fully formulated product with organic adhesion promoters, DM677 only requires appropriate dilution with water prior to use. The solids content of this product, measured at 110 °C, is approximately 15.5%.

Why Use Micashield DM677?

  • Protective coating for Fibre Glass Textiles
  • Flame and Heat Protective Barriers
  • Specialist Films / Coatings

How To Apply Micashield

  • Conventional industrial textile coating techniques.
  • Dilute with de-mineralised water to the appropriate solids content for the level of coating required; a commonly used dilution is: 70% DM677 to 30% water.
  • It is the user’s responsibility to establish the correct dilution for their process / application.

Typical Properties

D90 (90% of particles less than) 175 μm Ph ~9
D90 (90% of particles less than)
150 – 200 μm
pH
7 – 10
Solids Content
15.5 ± 0.5 %
Organic Additives
10 to 20 % (Dry mass basis)
Viscosity*
3000 – 7000 cP
Colour
Gold / brown
*Brookfield viscometer, spindle No. 5 at 20 rpm.

15/07/2021
Information presented above is given in good faith as accurate and reliable but is not to be taken as a guarantee. The figures provided are intended to be a guide to expected average values and should not be interpreted as a specification. Any potential applications referred to are not to be construed as recommendations. It is the responsibility of the user to determine suitability for any specific purpose.